EDS11-103E Datasheet, PDF (1/6 Pages) Fuji Electric – FC SERIES MANUAL LOADER(CONTINUOUS OUTPUT TYPE)

FC SERIES MANUAL LOADER
(CONTINUOUS OUTPUT TYPE)
DATA SHEET
The FC series manual loader is available in two types, a
manual control type and a remote control type used in com-
bination with a compact controller.
This instrument is equipped with a solid state indicator
and pushbutton operation circuit to provide easy readouts
and handling for process operation by man-machine
communication.
It can be directly connected to a thermocouple, resistance
bulb or 4 to 20mA input optionally.
FEATURES
1. High reliability
The manual loader is a solid state instrument having few
mechanical parts. The indicator and other units which
formerly consisted of mechanical parts are also designed
with solid state circuits to provide high reliability.
2. Application of international standards
The instrument is compact, and the external dimensions
comply with international IEC. The power supply and
signal also comply with IEC standards (24V, 1 to 5V DC).
Operation on 100V or 200V AC power supply is possible.
3. Front panel operation
Process values, valve position input, etc. can be read
accurately from the digital display on the panel front.
Parameter setting and manual operation are also possible
from the front of the panel.
FUNCTIONAL DIAGRAM
PNB1
Process value input
(PV)
External MV input
(Al1)
Valve position
command (EXS)
Manual mode
command (SMV)
PV
MV
Linearize
Square-root
extraction
Filter
Limiter
HL
Prearranged valve position
M
HM
MV
Manual
back up
HMV
FAULT
KPV
ALM
Manual mode
output (M)
Compensated
process value
signal (KPV)
Control output
(voltage) (MV)
Control output
(current) (MI)
FLT output
High alarm
output (H)
Low alarm
output (L)
EDS11-103e
Date Jul. 1, 1994