EDS10-46C Datasheet, PDF (1/4 Pages) Fuji Electric – MOVING COIL TYPE ALARMING INDICATOR

MOVING COIL TYPE ALARMING INDICATOR
DATA SHEET
PAK
The moving coil type alarming indicator is designed to
receive various input signals such as FC series signals. DC
voltage or current, and signals from themocouples or
resistance bulbs.
FEATURES
1. Direct connection of input signals.
2. High input impedance (1MΩ for 1 to 5V DC input).
No circuit adjusting resistor is required for thermocouple
input.
3. Compact and lightweight.
SPECIFICATIONS
Input signal:
FC series signal
A; 1 to 5V DC
B; 4 to 20mA DC
DC current
D; 0 to 100µA ....... 200mA DC
DC voltage
E; 0 to 10mV ........ 5V DC
Thermocouple
F; 0 to 10mV DC or more
(with reference junction compen-
sator)
(Upper limit overshoot burnout cir-
cuit is available on request)
G; 10mV DC span or more
(with reference junction compen-
sator)
(Upper limit overshoot burnout cir-
cuit is available on request)
Resistance bulb
H; JPt100Ω
50°C span or more, 3-wire type
W; Pt100Ω
50°C span or more, 3-wire type
Ring tube (resistance span 14Ω)
Slide resistant (resistance span 100Ω)
J; 3-wire type
K; 2-wire type (with adjusting resistor)
Opening angle transmitter (resistance
span 100Ω)
L; 3-wire type (zero point and span
adjustable)
Input resistance and allowable input signal source resistance:
Input signal
Input
resistance
Allowable input signal
source resistance
Voltage
1 to 5V
Others
1MΩ
40kΩ to 1MΩ
2kΩ or less
100Ω or less
Current
4 to 20mA
Others
Thermocouple
5Ω
1 to 100Ω
40 to 600kΩ
–––
–––
100Ω or less
50Ω or less when burnout
circuit
Resistance
–––
6Ω or less per wire
Allowance:
± 1.0% of full scale
Scale length: 100mm
Response time: Within 3 sec (time required for stabilizing
the indicator pointer within ± 1.5% after
applying input corresponding to 2/3 (ap-
prox.) of full scale)
Power supply: 100V ± 10% AC, 50/60Hz
*200V ± 10% AC, 50/60Hz, or
*24V
+15%
–10%
AC, 50/60Hz
Power consumption:
Approx. 4.5VA max.
Ambient temperature:
–10 to +50°C
Ambient humidity:
30 to 90%RH
Enclosure:
Steel case
External dimensions (H × W × D):
48 × 144 × 275mm
Mass{weight}: Approx. 2kg
Finish color:
Munsell 7.5BG 3.2/0.8 or equivalent
EDS10-46c
Date Feb. 28, 1991