6MBP50TEA120 Datasheet, PDF (1/8 Pages) Fuji Electric – Econo IPM series 1200V / 50A 6 in one-package

6MBP50TEA120
Econo IPM series
1200V / 50A 6 in one-package
Features
· Temperature protection provided by directly detecting the junction
temperature of the IGBTs
· Low power loss and soft switching
· High performance and high reliability IGBT with overheating protection
· Higher reliability because of a big decrease in number of parts in
built-in control circuit
Maximum ratings and characteristics
Absolute maximum ratings(at Tc=25°C unless otherwise specified)
Item
Symbol
Bus voltage
DC
Surge
Short operating
Collector-Emitter voltage *1
Collector current
DC
1ms
DC
Collector power dissipation One transistor *3
Supply voltage of Pre-Driver *4
Input signal voltage *5
Input signal current
Alarm signal voltage *6
Alarm signal current *7
Junction temperature
Operating case temperature
Storage temperature
Solder temperature *8
Isolating voltage (Terminal to base, 50/60Hz sine wave 1min.)
Screw torque
Mounting (M5)
VDC
VDC(surge)
VSC
VCES
IC
ICP
-IC
PC
VCC
Vin
Iin
VALM
IALM
Tj
Topr
Tstg
Tsol
Viso
Rating
Unit
Min.
Max.
0
900
V
0
1000
V
400
800
V
0
1200
V
-
50
A
-
100
A
-
50
A
-
287
W
-0.5 20
V
-0.5 Vcc+0.5 V
-
3
mA
-0.5 Vcc
V
-
20
mA
-
150
°C
-20
100
°C
-40
125
°C
-
260
°C
-
AC2500 V
-
3.5
N·m
Note
*1 : Vces shall be applied to the input voltage between terminal P and U or ‚V or W, N and U or V or W
*2 : 125°C/FWD Rth(j-c)/(Ic x VF MAX)=125/0.86/(50 x 2.0) x 100>100%
*3 : Pc=125°C/IGBT Rth(j-c)=125/0.44=287W [Inverter]
*4 : VCC shall be applied to the input voltage between terminal No.4 and 1, 8 and 5, 12 and 9, 14 and 13
*5 : Vin shall be applied to the input voltage between terminal No.3 and 1, 7 and 5, 11 and 9, 16,17,18 and 13.
*6 :VALM shall be applied to the voltage between terminal No.2 and 1, No6 and 5, No10 and 9, No.19 and 13.
*7 : IALMshall be applied to the input current to terminal No.2,6,10 and 19.
*8 : Immersion time 10±1sec.