6MBP25VAA120-50 Datasheet, PDF (1/8 Pages) Fuji Electric – IGBT MODULE (V series) 1200V / 25A / IPM

http://www.fujielectric.com/products/semiconductor/
6MBP25VAA120-50
IGBT Modules
IGBT MODULE (V series)
1200V / 25A / IPM
Features
• Temperature protection provided by directly detecting
the junction temperature of the IGBTs
• Low power loss and soft switching
• High performance and high reliability IGBT with overheating
protection
• Higher reliability because of a big decrease in number of
parts in built-in control circuit
Maximum Ratings and Characteristics
Absolute Maximum Ratings (TC=25ºC, VCC=15V unless otherwise specified)
Items
Symbol
Min.
Collector-Emitter Voltage (*1)
VCES
0
Short Circuit Voltage
VSC
400
DC
IC
-
Collector Current
1ms
Icp
-
Duty=89% (*2)
-IC
-
Collector Power Dissipation
1 device (*3)
PC
-
Supply Voltage of Pre-Driver (*4)
VCC
-0.5
Input Signal Voltage (*5)
Vin
-0.5
Alarm Signal Voltage (*6)
VALM
-0.5
Alarm Signal Current (*7)
IALM
-
Junction Temperature
Tj
-
Operating Case Temperature
Topr
-20
Storage Temperature
Tstg
-40
Solder Temperature (*8)
Tsol
-
Isolating Voltage (*9)
Viso
-
Screw Torque
Mounting (M4) -
-
Note *1: VCES shall be applied to the input voltage between terminal P-(U,V, W) and (U,V, W)-N.
Note *2: Duty=125ºC/Rth(j-c)D /(IF×VF Max.)×100
Note *3: PC=125ºC/Rth(j-c)Q
Note *4: VCC shall be applied to the input voltage between terminal No.3 and 1, 6 and 4, 9 and 7,11 and 10.
Note *5: Vin shall be applied to the input voltage between terminal No.2 and 1, 5 and 4, 8 and 7,12~14 and 10.
Note *6: VALM shall be applied to the voltage between terminal No.15 and 10.
Note *7: IALM shall be applied to the input current to terminal No.15.
Note *8: Immersion time 10±1sec. 1time
Note *9: Terminal to base, 50/60Hz sine wave 1min. All terminals should be connected together during the test.
Max.
1200
800
25
50
25
166
20
VCC+0.5
VCC
20
150
110
125
260
AC2500
1.7
Units
V
V
A
A
A
W
V
V
V
mA
ºC
ºC
ºC
ºC
Vrms
Nm
1