UMFT234XD Datasheet, PDF (5/11 Pages) Future Technology Devices International Ltd. – UMFT234XD Breakout Modules

UMFT234XD Datasheet
Version 1.1
Document Reference No.: FT_000801 Clearance No.: FTDI# 327
3.4 Configuring the MTP ROM
The FT234XD IC on the module contains an embedded MTP ROM, this can be used to specify the
functions of the CBUS0 pin, the current drive on each signal pin, current limit for the USB bus and the
descriptors of the device. These features can be programmed using FTDI’s programming utility FT_Prog.
For details on using FT_Prog, please see the FT_PROG User Guide.
When programming the MTP ROM please note:
i) The Max Bus Power setting of the MTP ROM should specify the maximum current to be drawn from
the USB host/hub when enumerated. For high-powered USB devices the current limit when
enumerated is between 100mA and 500mA, for low-powered USB devices the current limit is
100mA.
4 Module Dimensions
36.3
15.5
14.1
44.5
2.00
Measurements given in millimetres
Tolerance +/-0.1mm
Figure 4.1 UMFT234XD-01 Module Dimensions
5
Copyright © 2015 Future Technology Devices International Limited