DS_FT311D Datasheet, PDF (20/40 Pages) Future Technology Devices International Ltd. – The FT311D is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port.

DS_FT311D USB ANDROID HOST IC Datasheet
Version 1.0
Document No.: FT_000660 Clearance No.: FTDI# 305
7 Absolute Maximum Ratings
The absolute maximum ratings for FT311D are shown in Table 7.1. These are in accordance with the
Absolute Maximum Rating System (IEC 60134). Exceeding these may cause permanent damage to the
device.
Parameter
Value
Unit
Storage Temperature
-65°C to 150°C
Degrees C
Floor Life (Out of Bag) At Factory Ambient
( 30°C / 60% Relative Humidity)
168 Hours
(IPC/JEDEC J-STD-033A MSL Level 3
Compliant)*
Hours
Ambient Temperature (Power Applied)
-40°C to 85°C
Degrees
C.
Vcc Supply Voltage
0 to +3.63
V
VCC_IO
0 to +3.63
V
VCC_PLL_IN
0 to + 1.98
V
DC Input Voltage - USBDP and USBDM
-0.5 to +(Vcc +0.5)
V
DC Input Voltage - High Impedance
Bidirectional
-0.5 to +5.00
V
DC Input Voltage - All other Inputs
-0.5 to +(Vcc +0.5)
V
DC Output Current - Outputs
4
mA
DC Output Current - Low Impedance
Bidirectional
4
mA
Table 7.1 Absolute Maximum Ratings
* If devices are stored out of the packaging beyond this time limit the devices should be baked
before use. The devices should be ramped up to a temperature of 125°C and baked for up to 17
hours.
7.1 DC Characteristics
DC Characteristics (Ambient Temperature -40˚C to +125˚C)
Parameter
Description
Minimum Typical Maximum
Units
Conditions
VCC Operating Supply
Vcc1
2.97
3.3
3.63
V
Voltage
Copyright © 2012 Future Technology Devices International Limited
20