FT311D Datasheet, PDF (16/40 Pages) Future Technology Devices International Ltd. – The FT311D is a Full Speed USB host specifically targeted at providing access to peripheral hardware from an Android platform with a USB device port.null

DS_FT311D USB ANDROID HOST IC Datasheet
Version 1.2
Document No.: FT_000660 Clearance No.: FTDI# 305
Mode CPOL CPHA
0
0
0
1
0
1
2
1
0
3
1
1
Table 5.3 - Clock Phase/Polarity Modes
Figure 5-5 - SPI CPOL CPHA Function
5.5.2 Serial Peripheral Interface – Slave
External - SPI Master
CLK
SS#
MOSI
MISO
FT311 - SPI Slave
Figure 5-6 SPI Slave block diagram
FT311D has an SPI Slave module that uses four wire interfaces: MOSI, MISO, CLK and SS#. An SPI
transfer can only be initiated by the SPI Master and begins with the slave select signal being asserted.
This is followed by a data byte being clocked out with the master supplying CLK. The master always
supplies the first byte, which is called a command byte. After this the desired number of data bytes are
transferred before the transaction is terminated by the master de-asserting slave select. An SPI Master is
able to abort a transfer at any time by de-asserting its SS# output. This will cause the Slave to end its
current transfer and return to idle state.
Copyright © 2013 Future Technology Devices International Limited
16