FT232BQ-REEL Datasheet, PDF (14/34 Pages) Future Technology Devices International Ltd. – USB UART IC

Document No.: FT_000329
FT232BL/BQ USB UART IC Datasheet Version 2.2
Clearance No.: FTDI# 171
5 Devices Characteristics and Ratings
5.1 Absolute Maximum Ratings
The absolute maximum ratings for the FT232B devices are as follows. These are in accordance with the
Absolute Maximum Rating System (IEC 60134). Exceeding these may cause permanent damage to the
device.
Parameter
Value
Unit
Storage Temperature
-65 to +150
˚C
Floor Life (Out of Bag) At Factory Ambient
(30°C / 60% Relative Humidity)
192
(MSL 3 Compliant)
**Note 2
Hours
Ambient Temperature (Power Applied)
0 to +70
˚C
M.T.B.F. (at 35°C)
247484
≈ 28
Hours
Years
VCC Supply Voltage
-0.5 to +6.00
V
DC Input Voltage – USBDP and USBDM
-0.5 to +3.8
V
DC Input Voltage – High Impedance Bidirectional
-0.5 to + (VCC +0.5)
V
DC Input Voltage – All Other Inputs
-0.5 to + (VCC +0.5)
V
DC Output Current – Outputs
24
mA
DC Output Current – Low Impedance
Bidirectional
24
mA
Power Dissipation
(VCC = 5.25V)
500
mW
Electrostatic Discharge Voltage
(Human Body Model) (I<1uA)
±3000
V
Latch Up Current
±200
mA
(Vi = +/- 10V maximum, for 10ms)
Table 5.1 Absolute Maximum Ratings
**Note 2 – If devices are stored out of the packaging beyond this time limit the devices should be baked
before use. Refer to JEDEC 033b for baking details.
Copyright © 2011 Future Technology Devices International Limited
14