FT4232HL-REEL Datasheet, PDF (12/55 Pages) Future Technology Devices International Ltd. – Quad High Speed USB to Multipurpose UART/MPSSE IC

3.1.4.2
FT4232H QUAD HIGH SPEED USB TO MULTIPURPOSE UART/MPSSE IC
Datasheet
Version 2.4
Document No.: FT_000060 Clearance No.: FTDI#78
FT4232H pins used in a Synchronous or Asynchronous Bit-Bang Interface
The FT4232H channel A, B, C or channel D can be configured as a bit-bang interface. There are two types
of bit-bang modes: synchronous and asynchronous.
When configured in any bit-bang mode (synchronous or asynchronous), the pins used and the descriptions
of the signals are shown in Table 3.6
Channel
Number
Pin Nos.
Name
Type
Synchronous or Asynchronous Bit-Bang
Configuration Description
A
24,23,22,21
,
ADBUS[7:0]
I/O
Channel A, D7 to D0 bidirectional bit-bang data
19,18,17,16
B
34,33,32,30
,
BDBUS[7:0]
I/O
Channel B, D7 to D0 bidirectional bit-bang data
29,28,27,26
C
46,45,44,43
,
CDBUS[7:0]
I/O
Channel C, D7 to D0 bidirectional bit-bang data
41,40,39,38
D
59,58,57,55
DDBUS[7:0]
I/O
Channel D, D7 to D0 bidirectional bit-bang data
54,53,52,48
Table 3.6 Channel A,B,C and D Synchronous or Asynchronous Bit-Bang Configured Pin
Descriptions
For a functional description of this mode, please refer to section 4.5 Synchronous & Asynchronous Bit-Bang
Interface Mode Desc..
Copyright © Future Technology Devices International Limited
12