UMFT51AA Datasheet, PDF (1/16 Pages) Future Technology Devices International Ltd. – UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller

UMFT51AA-01 Datasheet
Version 1.0
Document Ref erence No.: FT_001141 Clearance No.: FTDI# 479
Future Technology
Devices International
Datasheet
UMFT51AA 8051
Compatible Module
UMFT51AA is an FT51A DIP module that is compatible with an 8051 microcontroller.
1 Introduction
1.1 Features
The UMFT51AA is a development module for FTDI’s
FT51AQ, one of the devices from FTDI’s range of
microcontrollers with USB interface bridging features
integrated. FT51A is a MCU series which includes the
following features: USB client and USB hub
interfaces, 8051 core, 8-bit ADC, UART, SPI, I²C, 245
FIFO and PWM.
The UMFT51AA is a module which is designed to plug
into a standard 0.6” wide 40 pin DIP socket.
All components used, including the FT51AQ are Pb-
free (RoHS compliant).
The UMFT51AA is built with a FT51AQ; many of the
features of the FT51AQ can be utilized with this
module. For a full list of the FT51A’s series features
refer to the FT51A datasheet which can be found by
clicking here.
In addition to the features listed in the FT51A
datasheet, the UMFT51AA has the following features:
 PCB assembly module is designed to fit a standard
15.24mm (0.6”) wide 40 pin DIP socket. Pins are
on a 2.54mm (0.1”) pitch. This module is a drop
in replacement for an 8051 microcontroller.
 An on board USB type A socket and plug allow
modules to be connected to a PC via a standard A
extension cable or directly. This module is also
capable of cascading several modules by utilizing
the USB hub feature.
 Debugger interface header used for debugging
and programming the FT51AQ. Designed for
operation with the FTPD-1 programmer /
debugger module. See the FTPD-1 datasheet for
details about this module.
 Onboard jumper for configuring the FT51AA to be
in self powered or USB powered modes.
N either the whole nor any part of the information c ontained in, or the produc t des c ribed in this manual, may be adapted or
reproduc ed in any material or elec tronic form without the prior written c ons ent of the c opyright holder. T his produc t and its
doc umentation are s upplied on an as - is basis and no warranty as to their s uitability for any partic ular purpos e is either made or
implied. Future T ec hnology D evices I nternational L td will not ac c ept any c laim for damages hows oever arising as a res ult of us e or
failure of this produc t. Y our s tatutory rights are not affec ted. T his produc t or any variant of it is not intended for us e in any
medic al appliance, device or s ystem in whic h the fail ure of the produc t might reas onably be expected to res ult in pers onal injury.
T his doc ument provides preliminary information that may be s ubject to c hange without notice. N o freedom to us e patents or oth er
intellectual property rights is implied by the pub lication of this doc ument. Future T echnology D evic es I nternational L td, U nit 1 , 2
Seaward P lac e, C enturion Business P ark, G lasgow G 4 1 1HH U nited Kingdom. Sc otland Registered C ompany N umber: SC 1 3 6 6 4 0
Copyright © 2015 Future Technology Devices International Limited
1