UM232H-B Datasheet, PDF(1/16 Page) Future Technology Devices International Ltd. – UM232H-B USB to Serial/Parallel Break-Out Module

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

UM232H-B Datasheet, PDF (1/16 Pages) Future Technology Devices International Ltd. – UM232H-B USB to Serial/Parallel Break-Out Module

UM232H-B Datasheet

Version 1.3

Document Reference No.: FT_000721 Clearance No.: FTDI# 320

Future Technology

Devices

International Ltd

Datasheet

UM232H-B USB to

Serial/Parallel Break-Out

Module

UM232H-B is a multiple-interface Hi-Speed USB to UART, 245 FIFO,

FT1248, I2C, SPI and GPIO break-out module.

1 Introduction

1.1 Features

The UM232H-B is a development module for FTDIâs

FT232H Hi-Speed to Serial/Parallel interface

converter. This single interface channel IC can be

configured to transfer data over the following

interfaces UART, 245 FIFO, FT1248, I2C, SPI and

GPIO.

For detail on FT232H, refer to the FT232H

datasheet.

This hardware is a breakout board that converts Hi-

Speed USB2.0 to a serial/parallel interface and

connects the signals to a 2.00mm pitch 18pin

female receptacle. No USB connector is used,

instead this modules plugs directly into the USB

host connector and the pads of the PCB makes

electrical contact with the electrical contacts of the

host USB connector.

All signals on these modules operate at +3.3V

voltage levels, however all I/Os are 5V tolerant.

Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced

in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are

supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology

Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this product. Your

statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in

which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminary

information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by

the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,

Glasgow, G41 1HH, United Kingdom. Scotland Registered Number: SC136640

▷