English
Language : 

NERO-NP1 Datasheet, PDF (1/18 Pages) Future Technology Devices International Ltd. – 16MHz ATmega328 32-pin TQFP package microcontroller.
NerO Module Datasheet
Version 1.0
D oc ument Reference N o.: FT _001285
C learance N o.: FT DI#4 85
Future Technology
Devices International
Limited
Datasheet
NerO Module
1 Introduction
1.1 Features
The Nero is a reference design for an energy
efficient Arduino UNO compatible board based on
the ATMEGA328 with the FTDI FT231X USB-
UART, capable of operating at 5V with a full 1A
while remaining cool to the touch
There are 3 type of modules for selection:
 NerO-LP1, with 2.54mm pitch female header
with long shield pins
 NerO-SP1, with 2.54mm pitch female header
with short shield pins
 NerO-NP1, with spare shield pins but not
mounted. (provide long shield pins
externally.)
 16MHz ATmega328 32-pin TQFP package
microcontroller.
 UNO R3 form factor
 14 Digital I/O Pins (6 PWM outputs)
 6 Analog Inputs
 FTDI FT231XS USB UART interface
 A Micro-B USB connects to PC connect or
provides power supply over USB for board.
 VIN Input voltage - 7V to 20V ( 9V or 12V
recommended )
 Hardware Reset button provided.
 5V Switching regulator with 1A output current
 CE and FCC certified
 Optiboot bootloader preloaded
 Arduino Software (IDE) and UNO library
compatible,
 Arduino shield compatible
 FTDI Shield available soon
N either the whole nor any part of the information contained in, or the product described in this manual, may be adapted or
reproduced in any material or elec tronic form without the prior written c onsent of the c opyright holder. T his product and its
doc umentation are s upplied on an as- is basis and no warranty as to their s uitability for any partic ular purpos e is either made or
implied. Future T ec hnology Devic es I nternational L td will not accept any claim for damages hows oever arising as a res ult of u se or
failure of this produc t. Y our statutory rights are not affected. T his produc t or any variant of it is not intended for us e in any
medical appliance, device or s ystem in whic h the failure of the produc t might reasonably be expected to res ult in pers onal in jury.
T his doc ument provides preliminary information that may be s ubject to c hange without notice. N o freedom to use patents or other
intellec tual property rights is implied by the publication of this doc ument. Future Tec hnology D evices I nternational L td, U ni t 1 , 2
Seaward P lac e, C enturion Business P ark, G lasgow G 4 1 1HH U nited Kingdom. Sc otland Registered C ompany N umber: SC 136640
Copyright © 2016 Future Technology Devices International Limited
1