English
Language : 

FTPD-1 Datasheet, PDF (1/13 Pages) Future Technology Devices International Ltd. – Full-Speed USB to UART converter
FTPD-1 FTDI Programmer Debugger 1 Module Datasheet
Version 1.0
Document Ref erence No.: FT_001263 Clearance No.: FTDI# 480
Future Technology
Devices International
Ltd
FTPD-1 FTDI Programmer
Debugger 1 Module
Datasheet
FTPD-1 is a module used for programming and debugging.
1. Introduction
1.1 Features
The FTPD-1 is a module with a FT230X USB to
UART converter and a dual buffer. The FTPD-1
utilises these components to generate a single
line half-duplex UART signal with no handshake
w hich can be used to program several of FTDI’s
MCU devices, predominantly FT51A.
This module also provides a switched 5V power
supply to the target device and is configured
such that it does not infringe USB compliance
regulations for supplying bus power.
FTPD-1’s board dimensions are the same as a
credit card; however the fitted components give
it additional height. The module is supplied with
a berg connector ribbon cable; however it is
compatible for operation with pogo pin cables.
All components used, including the FT230X are
Pb-free (RoHS compliant).
The FTPD-1 has the following features:
 Full-Speed USB to UART converter
 Single half-duplex UART data pin input/output
 Two dedicated GPIOs to control Reset# and Prog#
outputs
 TXDEN line to control the direction of the half-
duplex UART data
 PWREN# line to control the power supply
 2X3 way 2.54mm pitch shrouded male header
 150mm ribbon cable with Female to Female
2.54mm pitch 2x3 way connectors
 Protected by resettable fuse with 0.5A hold current
and schottky diode on the output power line.
 Pogo pin compatible
 Power output available, indication LED
N either the whole nor any part of the information c ontained in, or the produc t des c ribed in this manual, may be adapted or
reproduc ed in any material or elec tronic form without the prior written c ons ent of the c opyright holder. T his produc t and its
doc umentation are s upplied on an as - is basis and no warranty as to their s uitability for any partic ular purpose is either made
or implied. Future T echnology D evices I nternational L td will not ac c ept any c laim for damages hows oever aris ing as a res ult
of us e or failure of this produc t. Y our s tatutory rights are not affec ted. T his product or any variant of it is not intended for use
in any medic al applianc e, devic e or s ys tem in whic h the failure of the produc t might reas onably be expec ted to res ult in
pers onal injury. T his doc ument provides preliminary information that may be s ubject to c hange without notice. N o freedom to
us e patents or other intellectual property rights is implied by the public ation of this doc ument. Future T ec hnology D evic es
I nternational L td, U nit 1 , 2 Seaward P lace, C enturion Business P ark, G lasgow G 4 1 1 HH U nited Kingdom. Sc otland Regis tered
C ompany N umber: SC 1 3 6 6 4 0
Copyright © 2015 Future Technology Devices International Limited
1