FT600 Datasheet, PDF (1/29 Pages) Tyco Electronics – New surface-mount fuse products for overcurrent protection of communications equipment

DS_FT600Q-FT601Q IC Datasheet/FT601 USB 3.0 to FIFO Bridge
Version 1.01
Document No.: FT_001118 Clearance No.: FTDI#424
Future Technology
Devices International
Ltd.
FT600/FT601
(USB 3.0 to FIFO Bridge)
The FT600/FT601 is a USB 3.0 to
FIFO interface bridge chip with the
following advanced features:
 Supports USB 3.0 Super Speed (5Gbps)/USB  Supports Remote Wakeup capability.
2.0 High Speed (480Mbps)/USB 2.0 Full
Speed (12Mbps) transfer.
 Supports multi voltage I/O: 1.8V, 2.5V and 3.3V.
 Supported USB Transfer Type:
Control/Bulk/Interrupt
 Configurable GPIO support.
 Internal LDO 1.0V regulator.
 Up to 8 configurable endpoints (PIPEs).
 Integrated power-on-reset circuit.
 Supports 2 parallel slave FIFO bus protocols _{ User programmable USB descriptors.}
245 and FIFO mode, FT601 with 32 bit
parallel interface has a data bursting rate up ^{ Supports Battery Charging spec. BC1.2.}
to 400MB/s.
 Available as FT600-16bit/FT601-32bit FIFO interface.
 Supports 4 IN channels and 4 OUT channels
on FIFO bus connectivity.
 Built-in 16kB FIFO data buffer RAM.
 Industrial operating temperature range: -40 to 85⁰C.
 Available in compact Pb-free QFN-76(32bit) and QFN-
56(16bit) packages (both RoHS compliant).
Neither the whole nor any part of the information contained in, or the product described in this manual, may be adapted or reproduced
in any material or electronic form without the prior written consent of the copyright holder. This product and its documentation are
supplied on an as-is basis and no warranty as to their suitability for any particular purpose is either made or implied. Future Technology
Devices International Ltd will not accept any claim for damages howsoever arising as a result of use or failure of this produ ct. Your
statutory rights are not affected. This product or any variant of it is not intended for use in any medical appliance, device or system in
which the failure of the product might reasonably be expected to result in personal injury. This document provides preliminar y
information that may be subject to change without notice. No freedom to use patents or other intellectual property rights is implied by
the publication of this document. Future Technology Devices International Ltd, Unit 1, 2 Seaward Place, Centurion Business Park,
Glasgow G41 1HH United Kingdom. Scotland Registered Company Number: SC136640
Copyright © 2015 Future Technology Devices International Limited 1