FSP600-702UH_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – industrial level of switching power

IPC PSU
FSP600-702UH
DE SC RIP TIO N
FSP600-702UH is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 600 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
SAFETY STANDARD APPAOVAL
AP P L IC ATIO N
For standard, advanced server and storage power system.
FEATURES
80 Plus Bronze
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
Line input fuse protection
W ATTAGE
Wa tta g e :
600W
DIMENSION
Dimension:
240mm(L) x 100mm(W) x
70mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80 Plus Bronze
Altitude:
5000M
INPUT SPECIFICATION
Input Range:
90-264 Vac
Input Frequency: 47-63 Hz
Input Current:
115V@ 10.0 Amps-rms maximum
230V@ 5.0 Amps-rms maximum
GENERAL SPECIFICATION
Effciency:
85% 230VAC
Vo lta g e
+3.3V, +12V, +5V, +5SB: ±5%
Re g ula tio n:
-12V: ±10%
OUTPUT SPECIFICATION
Hold up Time:
Ouput Voltage
Re g ula tio n:
Output Rise Time:
Ripple & Noise:
115V/60Hz 16mSec.
Minimum@50% Load,
230V/50Hz 16mSec.
Minimum,@50% Load
+3.3Vdc output : +3.5 Vdc
minimum, + 4.5Vdc
maximum
+5Vdc output : +5.5 Vdc
minimum, + 6.82Vdc
maximum
+12Vdc output : +13.4 Vdc
minimum, + 15.6Vdc
maximum
115V-rms/230V-rms 5V
20ms Maximum
115V-rms/230V-rms 12V
20ms Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
12V3:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
20°C to + 80℃
MT BF :
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃, 75%
output load, and nominal AC
inout voltage
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
25A
Output Min.(A)
1.5A
+5V
50mV
±5%
25A
1A
+12V1
120mV
±5%
16A
1A
+12V2
120mV
±5%
16A
1A
+12V3
120mV
±5%
16A
1A
-12V
120mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
3A
0A
NO TE S
5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
The 12V1 and 12V2 and 12V3 total output shall not exceed 48A.
The +3.3V and +5V total output shall not exceed 150 watts.
The total output shall not exceed 600 watts
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice