FSP500-50FSPT_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – industrial level of switching power

IPC PSU
FSP500-50FSPT
DE SC RIP TIO N
FSP500-50FSPT is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 500 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
AP P L IC ATIO N
For standard, advanced server, NAS and industrial power
system.
FEATURES
80 Plus Platinum
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
Line input fuse protection
W ATTAGE
Wa tta g e :
500W
DIMENSION
Dimension:
150mm(L) x 81.5mm(W) x
40.5mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80 Plus Platinum
Altitude:
5000M
PMBus:
v1.2
INPUT SPECIFICATION
Input Range:
90-264 Vac
Input Frequency: 47-63 Hz
Input Current:
115V@ 7.5 Amps-rms maximum
230V@ 3.5 Amps-rms maximum
GENERAL SPECIFICATION
Effciency:
95% 230VAC
Vo lta g e
+3.3V, +12V, +5V, +5SB: ±5%
Re g ula tio n:
-12V ±10%
Inrush Current: 50A @ 115V and 230V
PWOK Delay Time: 500ms > PWOK > 100ms
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
15A
Output Min.(A)
0.1A
+5V
50mV
±5%
18A
0.1A
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Ouput Voltage
Re g ula tio n:
Output Rise Time:
Ripple & Noise:
+3.3Vdc output : +3.135
Vdc minimum, + 3.465Vdc
maximum
+5Vdc output : +4.75 Vdc
minimum, + 5.25Vdc
maximum
+5Vsb output : +4.75 Vdc
minimum, + 5.25Vdc
maximum
+12Vdc output : +11.4 Vdc
minimum, + 12.6Vdc
maximum
115V-rms/230V-rms 5V
20ms Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
20°C to + 80℃
MT BF :
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃,
maximum-output load, and
nominal AC inout voltage
+12V1
120mV
±5%
24A
0.1A
+12V2
120mV
±5%
24A
0.1A
+5Vsb
50mV
±5%
3A
0.05A
NO TE S
Maximum continuous total DC output power should not exceed 500W.
Maximum load on the combined +12V output shall not exceed 40A.
C ombined +3.3V and +5V power shall not exceed 100W.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice