FSP500-50ARN_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – This specification describes a 400 watts power supply.

PC PSU
FSP500-50ARN
DE SC RIP TIO N
This specification describes a 400 watts power supply. With
5 output, and remote ON/OFF control for ATX-12V system
and a “Power factor correction (active PFC )” circuit at
200V-240Vac.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
500W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
SAFETY STANDARD APPAOVAL
PRODUCT HIGHLIGHT
Efficiency Level:
80PLUS Silver
Erp Lot:
<0.5W
Input Voltage:
230Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
200-240 Vac
47-63 Hz
230V@ 4.0 Amps-rms
maximum
OUTPUT SPECIFICATION
Output Rise Time:
+3.3V 20Ms (maximum)
+5V 20Ms (maximum
+12 V 20Ms (maximum)
-12 V 20Ms (maximum)
GENERAL SPECIFICATION
Efficiency:
80PLUS Silver
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -40°C to +
70℃
MT BF :
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
24A
Output Min.(A)
0.2A
+5V
50mV
±5%
20A
1A
+12V1
50mV
±5%
40A
0.5A
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
3A
0A
NO TE S
+3.3V & +5V total output not exceed 120W.
When +5V is load to 20A, the +3.3V maximum load is 7.5A.
When +3.3V is load to 24A, the +5V maximum load is 9A.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice