FSP460-60HHN85_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – AC -line powered switching power supply

PC PSU
FSP460-60HHN(85)
DE SC RIP TIO N
This is the specification of Model FSP460-60HHN,(85); AC -
line powered switching power supply with active PFC
(Power Factor C orrection) circuit, meet EN61000-3-2
features. Also, +5Vsb power is less than 0.5Winput at
power off mode (PS_ON input at high state) which is
comply with ErP Lot 6 year 2013 requirement.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
460W
SAFETY STANDARD APPAOVAL
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Bronze
Erp Lot:
<0.5W
Input Voltage:
230V
INPUT SPECIFICATION
Input Range:
200-240 Vac
Input Frequency:
47-63 Hz
Input Current:
230V@ 3.0Amps-rms maximum
OUTPUT SPECIFICATION
Output Rise Time:
+ 3.3Vdc : 20ms Maximum
+ 5Vdc : 20ms Maximum
+ 12Vdc : 20ms Maximum
+ 5Vsb : 20ms Maximum
- 12Vdc : 20ms Maximum
GENERAL SPECIFICATION
Efficiency:
Bronze
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:10°C to
+40°C
Storage Temperature: -20°C to +
80℃
MT BF :
The power supply reliability,when
calculated by MIL-HDBK-217;latest
revision, are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
24A
Output Min.(A)
0.1A
+5V
50mV
±5%
24A
0.2A
+12V1
120mV
±5%
17A
0.1A
+12V2
120mV
±5%
17A
0.5A
-12V
120mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
2.5A
0A
NO TE S
( 1 ) +3.3V & +5V total output not exceed 123W.
( 2 ) +12V2 peak current is 18A (less then 10m Sec.) , minimum voltage during peak is >11.0Vdc.
( 3 ) +5Vsb peak current is 2.5A(less then 500m Sec.) , minimum voltage during peak is > 4.5Vdc.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice