FSP400-70RGHBB1_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – industrial level of switching power

IPC PSU
FSP400-70RGHBB1
DE SC RIP TIO N
FSP400-70RGHBB1 is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 400 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
AP P L IC ATIO N
For standard, advanced server and storage power system.
SAFETY STANDARD APPAOVAL
FEATURES
Remarkable power density
Excellent redundant PSU efficiency
Well working performance at 50℃ (24 house running)
Low ripple and noise
Support OTP, OVP, OC P and SC P circuit protection
C omply with FC C , C B, TUV, C E and C C C certification or
declearation requirement
W ATTAGE
Wa tta g e :
400W
DIMENSION
Dimension:
190mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Altitude:
PMBus:
80PLUS Gold
5000M
For standard, advanced server
and storage power system.
INPUT SPECIFICATION
Input Range:
90-264 Vac
Input Frequency: 47-63 Hz
Input Current:
115V@ 8.0 Amps-rms maximum,
230V@ 4.0Amps-rms maximum
GENERAL SPECIFICATION
Vo lta g e
+3.3V, +12V, +5V, +5SB: ±5%
Re g ula tio n:
-12V: ±10%
OUTPUT SPECIFICATION
Hold up Time:
Ouput Voltage
Re g ula tio n:
Output Rise Time:
Ripple & Noise:
115V/60Hz 17mSec.
Minimum@100% Load,
230V/50Hz 17mSec.
Minimum,@100% Load
+3.3Vdc output : +3.9 Vdc
minimum, + 4.5Vdc
maximum
+5Vdc output : +5.7 Vdc
minimum, + 6.5Vdc
maximum
+12Vdc output : +13.3 Vdc
minimum, + 14.5Vdc
maximum
115V-rms/230V-rms 5V
20ms Maximum
115V-rms/230V-rms 12V
20ms Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
12V3:120mV p-p
-12V:200mV p-p
5Vsb:50mV p-p
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
20°C to + 80℃
Humidity
Operating : 5% to 90% RH,
Non-condensing
Storage :5 % to 90% RH,
Non-condensing
MT BF :
Using Bellcore, the
calculated MTBF> 100,000
hours of continuous
operation at 25℃ nominal
input
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
20A
Output Min.(A)
0A
+5V
50mV
±5%
20A
0A
+12V1
120mV
±5%
16A
0A
+12V2
120mV
±5%
16A
0A
+12V3
120mV
±5%
16A
0A
-12V
200mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
3A
0A
NO TE S
Maximum continuous total DC output power should not exceed 400W.
Maximum continuous combined load on +3.3VDC and +5VDC outputs shall not exceed 130W.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice