FSP400-60EGN_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – specification describes a 400 watts power supply.

PC PSU
FSP400-60EGN
DE SC RIP TIO N
This specification describes a 400 watts power supply. With
6 output, and remote ON/OFF control for ATX-12V system
and a “Power factor correction (active PFC )” circuit at
100V-240Vac.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
400W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80PLUS Gold
Erp Lot:
<0.5W
Input Voltage:
100~240Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
100-240 Vac
47-63 Hz
115V@ < 6.0 Amps - rms
230V@ < 3.0 Amps - rms
OUTPUT SPECIFICATION
Hold up Time:
115V/60Hz 17mSec.
Minimum@100% Load,
Output Rise Time:
+3.3V 20mS (maximum)
+5V 20mS (maximum)
+12 V 20mS (maximum)
-12 V 20mS (maximum)
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
24AA
Output Min.(A)
0.1AA
+5V
50mV
±5%%
22AA
0.2AA
SAFETY STANDARD APPAOVAL
GENERAL SPECIFICATION
Efficiency:
Gold
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -40°C to +
70℃
MT BF :
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
+12V1
5%mV
±5%%
18AA
0AA
+12V2
120mV
±5%%
18AA
0AA
-12V
200mV
±10%%
0.3AA
0AA
+5Vsb
50mV
±5%%
3AA
0.1AA
NO TE S
(1) +3.3V & +5V total output not exceed 120W.
When +5V is load to 22A, the +3.3V maximum load is 3A.
When +3.3V is load to 24A, the +5V maximum load is 8A.
(2) +12V1 & +12V2 total output not exceed 384W(32A).
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice