FSP350-70PFB_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – industrial level of switching power supply.

IPC PSU
FSP350-70PFB(24V)
DE SC RIP TIO N
FSP350-70PFB(24V) is an industrial level of switching
power supply. The power supply comes to offer the total
power capacity up to 350 Watts, and uses unique active
PFC (Power Factor C orrection) circuit design with its high-
load electrical components, makes it to be perfectly used
in an industrial environment. In addition, with its full range
of input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
SAFETY STANDARD APPAOVAL
AP P L IC ATIO N
For standard, advanced server, communication and
industrial power system.
FEATURES
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
Line input fuse protection
W ATTAGE
Wa tta g e :
350W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
PMBus:
NON-80PLUS
For standard, advanced server,
communication and industrial
power system.
INPUT SPECIFICATION
Input Range:
90-264 Vac
Input Frequency: 50-60 Hz
Input Current:
115V@ 6.0 Amps-rms maximum
230V@ 3.0 Amps-rms maximum
GENERAL SPECIFICATION
Vo lta g e
+3.3V, +12V, +5V, +5SB, +24V:
Re g ula tio n:
±5%
-12V, -5V: ±10%
OUTPUT SPECIFICATION
Hold up Time:
Ouput Voltage
Re g ula tio n:
Output Rise Time:
Ripple & Noise:
115V/60Hz 18mSec.
Minimum@100% Load,
230V/50Hz 18mSec.
Minimum,@100% Load
+3.3Vdc output : +3.5 Vdc
minimum, + 4.5Vdc
maximum
+5Vdc output : +5.5 Vdc
minimum, + 6.82Vdc
maximum
+12Vdc output : +13.4 Vdc
minimum, + 15.6Vdc
maximum
+24Vsb output : +26.4 Vdc
minimum, + 29Vdc
maximum
115V-rms/230V-rms 5V
20ms Maximum
115V-rms/230V-rms 12V
20ms Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
-5V:100mV p-p
24V:240mV p-p
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
20°C to + 80℃
MT BF :
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃,
maximum-output load, and
nominal AC inout voltage
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
10A
Output Min.(A)
0.5A
+5V
50mV
±5%
16A
0.5A
+12V1
120mV
±5%
15A
1A
-12V
120mV
±10%
0.5A
0A
+24V
240mV
±5%
5A
0.3A
-5V
100mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
2A
0A
NO TE S
5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off.
The +3.3V, +5V and +12V1 and 24V total output shall not exceed 335 watts.
The +3.3V and +5V total output shall not exceed 110 watts.
The total output shall not exceed 350 watts
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice