FSP300-60SGV Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – specification describes a 300 watts power supply.

PC PSU
FSP300-60SGV
DE SC RIP TIO N
This specification describes a 300 watts power supply. With
+5V stand-by, second 12V rail and remote ON/OFF control
and a “Power factor collector (PFC )” circuit to meet EPA
requirement of input range with in 115V/60HZ &
230V/50Hz.
AP P L IC ATIO N
Desktop , Mini-itx
W ATTAGE
Wa tta g e :
300W
SAFETY STANDARD APPAOVAL
DIMENSION
Dimension:
175mm(L) x 85mm(W) x
70mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80PLUS Gold
Erp Lot:
<0.5W
Input Voltage:
100~240Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
100-240 Vac
47-63 Hz
4.0 Amp (maximum) at 115
Vrms/ 60 Hz 2.0 Amp
(maximum) at 230 Vrms/ 50 Hz
OUTPUT SPECIFICATION
Output Rise Time:
+3.3V 20mS (maximum)
+5V 20mS (maximum)
+12V1 20mS (maximum)
+12V2 20mS (maximum)
-12V 20mS (maximum)
GENERAL SPECIFICATION
Efficiency:
80PLUS Gold
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -40°C to +
70℃
MT BF :
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
The special requirement is for
cooling fan that MTTF be guarantee
over 30,000 hours at 25℃ ambient
temperature.
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
18A
Output Min.(A)
0.3A
+5V
50mV
±5%
18A
0.2A
+12V1
120mV
±5%
13A
0.1A
+12V2
120mV
±5%
13A
0.5A
-12V
120mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
3A
0A
NO TE S
(1) +3.3V & +5V total output not exceed 103W.
When +5V is load to 18A, the +3.3V maximum load is 3.94A.
When +3.3V is load to 18A, the +5V maximum load is 8.72A.
(2) +12V1 & +12V2 total output not exceed 288W
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice