FSP300-60GHN85_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – specification describes a 300 watts power supply.

PC PSU
FSP300-60GHN(85)
DE SC RIP TIO N
This specification describes a 300 watts power supply. With
+5V stand-by, second 12V rail and remote ON/OFF control
for ATX-12V system and a “Power factor collector (PFC )”
circuit to meet EPA requirement of input range with in
115V/60HZ & 230V/50Hz.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
300W
SAFETY STANDARD APPAOVAL
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80PLUS Bronze
Erp Lot:
<0.5W
Input Voltage:
100~240Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
100-240 Vac
47-63 Hz
115V@ < 3.5 Amps - rms
230V@ < 2.0 Amps - rms
OUTPUT SPECIFICATION
Output Rise Time:
+ 3.3Vdc : 20ms Maximum
+ 5Vdc : 20ms Maximum
+ 12Vdc : 20ms Maximum
+ 5Vsb : 20ms Maximum
- 12Vdc : 20ms Maximum
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
21A
Output Min.(A)
0.1A
+5V
50mV
±5%
20A
0.2A
GENERAL SPECIFICATION
Efficiency:
80PLUS Bronze
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B,
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:10°C to
+50°C
Storage Temperature: -20°C to +
80℃
MT BF :
The power supply reliability,when
calculated by MIL-HDBK-217;latest
revision, are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
+12V1
50mV
±5%
14A
0.1A
+12V2
120mV
±5%
14A
0.5A
-12V
200mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
2.5A
0A
NO TE S
( 1 ) +3.3V & +5V total output not exceed 105W.
( 2 ) Maximum combined current for the +12V outputs shall be 24A.
( 3 ) +12V2 Peak current is 18A (less then 10m Sec.) , minimum voltage during peak is >11.0Vdc.
( 4 ) +5Vsb Peak current is 3.5A(less then 500m Sec.) , minimum voltage during peak is > 4.5Vdc.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice