FSP300-50ARN Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – specification describes a 300 watts power supply.

PC PSU
FSP300-50ARN
DE SC RIP TIO N
This specification describes a 300 watts power supply. With
5 output, and remote ON/OFF control for ATX-12V system
and a “Power factor correction (active PFC )” circuit at
200V-240Vac.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
300W
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Silver
Erp Lot:
<0.5W
Input Voltage:
230Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
200-240 Vac
47-63 Hz
2.5Amp (maximum) at 200-240
Vrms/ 50 Hz. .
OUTPUT SPECIFICATION
Output Rise Time:
+3.3V 20Ms (maximum)
+5V 20Ms (maximum
+12 V 20Ms (maximum)
-12 V 20Ms (maximum)
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
21A
Output Min.(A)
0.2A
+5V
50mV
±5%
15A
1A
SAFETY STANDARD APPAOVAL
GENERAL SPECIFICATION
Efficiency:
Silver
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -40°C to +
70℃
MT BF :
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
+12V1
120mV
±5%
24A
0.05A
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
2.5A
0A
NO TE S
+3.3V & +5V total output not exceed 103W.
When +5V is load to 15A, the +3.3V maximum load is 8.46A.
When +3.3V is load to 21A, the +5V maximum load is 6.74A.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice