FSP250-60RGHBA Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – industrial level of switching power

IPC PSU
FSP250-60RGHBA
DE SC RIP TIO N
FSP250-60RGHBA is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 250 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
SAFETY STANDARD APPAOVAL
AP P L IC ATIO N
Mainly for 1U server, storage and networking appliances.
FEATURES
Remarkable power density
Excellent redundant PSU efficiency
Operating altitude complies with 5Km certification
Well working performance at 50℃ (24 house running)
Low ripple and noise
Support OTP, OVP, OC P and SC P circuit protection
C omply with FC C , C B, TUV, C E and C C C certification or
declearation requirement
W ATTAGE
Wa tta g e :
250W
DIMENSION
Dimension:
260mm(L) x 106mm(W) x
41.3mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80 Plus Gold
Altitude:
5000M
INPUT SPECIFICATION
Input Range:
90-264 Vac
Input Frequency: 47-63 Hz
Input Current:
110V@40A, 230V@80A for Input
Inrush current
OUTPUT SPECIFICATION
Ouput Voltage
Re g ula tio n:
Ripple & Noise:
+3.3Vdc output : +3.9 Vdc
minimum, + 4.5Vdc
maximum
+5Vdc output : +5.7 Vdc
minimum, + 6.5Vdc
maximum
+12Vdc output : +13.3 Vdc
minimum, + 14.5Vdc
maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
40°C to + 70℃
MT BF :
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃, 70%
output load, and nominal AC
inout voltage
GENERAL SPECIFICATION
Effciency:
82% 230VAC
Vo lta g e
+3.3V, +12V, +5V, +5SB: ±5%
Re g ula tio n:
-12V: ±10%
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
19A
Output Min.(A)
0A
+5V
50mV
±5%
17A
0A
+12V1
120mV
±5%
14A
0.5A
+12V2
120mV
±5%
14A
0.5A
-12V
120mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
2A
0A
NO TE S
Maximum continuous total DC output power should not exceed 250W.
Maximum continuous combined load on +3.3 VDC and +5VDC outputs shall not exceed 97W.
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice