FSP250-60GHT Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – AC - line powered switching power supply with active PFC circuit

PC PSU
FSP250-60GHT,(85)F
DE SC RIP TIO N
This is the specification of Model FSP250-60GHT,(85)F; AC -
line powered switching power supply with active PFC
(Power Factor C orrection) circuit, meet EN61000-3-2 and
with Full Range Input features. Also, +5Vsb power is less
than 0.5Winput at power off mode (PS_ON input at high
state) which is comply with ErP Lot 6 year 2013
requirement.
AP P L IC ATIO N
Desktop , Mini-itx
W ATTAGE
Wa tta g e :
250W
DIMENSION
Dimension:
175mm(L) x 85mm(W) x
70mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
80PLUS Bonze
Erp Lot:
<0.5W
Input Voltage:
100~240Vac
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
100-240 Vac
47-63 Hz
115V< 3.0 Amps – rms
230V<1.5 Amps – rms
OUTPUT SPECIFICATION
SAFETY STANDARD APPAOVAL
GENERAL SPECIFICATION
Efficiency:
80PLUS Bonze
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:10°C to
+50°C
Storage Temperature: -20°C to +
80℃
MT BF :
The power supply reliability when
calculated by MIL-HDBK-217; latest
revision, are exceed 100,000 hours
with all output at 80% full load and
an ambient temperature of 25℃.
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 70mV
Regulation Load %
±5%
Output Max.(A)
14A
Output Min.(A)
0.5A
+5V
70mV
±5%
16A
0.3A
NO TE S
(1 ) +3.3V & +5V total output not exceed 110W.
( 2 ) Total output continuous shall not exceed 250W.
+12V1
140mV
±5%
14A
1A
+12V2
140mV
±5%
16A
1A
-12V
140mV
±10%
0.5A
0A
+5Vsb
70mV
±5%
2.5A
0A
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice