FSP200-61DL_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – IPC PSU

IPC PSU
FSP200-61DL(48V)
DE SC RIP TIO N
FSP200-61DL(48V) is an industrial level of switching power
supply. The power supply comes to offer the total power
capacity up to 200 Watts, and uses unique active PFC
(Power Factor C orrection) circuit design with its high-load
electrical components, makes it to be perfectly used in an
industrial environment. In addition, with its full range of
input and output electrical features, the power supply is
ideally the best choice for server, workstation,
communication or any other automation applications to
use. The product also complies with the latest safety and
EMC standards, which is perfectly to meet various
regulations worldwide.
AP P L IC ATIO N
For standard, advanced server, communication and
industrial power system.
FEATURES
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
100% burn-in under high ambient temperature(50℃)
Vacuum-impregnated transformer
MTBF:100K hours at 25℃
100% Hi-pot tested
Line input fuse protection
W ATTAGE
Wa tta g e :
200W
DIMENSION
Dimension:
150mm(L) x 81.5mm(W) x
40.5mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Altitude:
PMBus:
NON-80PLUS
2000M
For standard, advanced server,
communication and industrial
power system.
INPUT SPECIFICATION
Input Range:
-36--72 Vdc
Input Current:
15A
GENERAL SPECIFICATION
Vo lta g e
+3.3V, +12V, +5V, +5SB: ±5%
Re g ula tio n:
-12V: ±10%
PWOK Delay Time: 500ms > PWOK > 100ms
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV
50mV
Regulation Load %
±5%
Output Max.(A)
12A
Output Min.(A)
0A
+5V
50mV
±5%
12A
1A
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Ouput Voltage
Re g ula tio n:
Output Rise Time:
Ripple & Noise:
Over Current Protection:
Short Circuit Protection:
+3.3Vdc output : +3.7 Vdc
minimum, + 4.1Vdc
maximum
+5Vdc output : +5.7 Vdc
minimum, + 6.5Vdc
maximum
+12Vdc output : +13.1 Vdc
minimum, + 14.5Vdc
maximum
DC input 48V 5V 20ms
Maximum
DC input 48V 3.3V 20ms
Maximum
DC input 48V 12V 20ms
Maximum
3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
+5V……18A maximum
+12V……24A maximum
+3.3V……18A maximum
load < 0.1 Ohm
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -
20°C to + 80℃
MT BF :
The power supply have a
minimum predicted
MTBF(MIL-HDBK-217) of
100,000 hours of continuous
operation at 25℃,
maximum-output load, and
nominal AC inout voltage
+12V1
120mV
±5%
16A
1A
-12V
120mV
±10%
0.5A
0A
+5Vsb
50mV
±5%
2A
0A
NO TE S
5V, 3.3V, 12V, -12V Will gave the regulation to 10% when all load take off.
The +3.3V and +5V total output shall not exceed 80 watts.
The total output shall not exceed 200 watts
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice