FSP132-KHAM1 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – Medical PSU

Medical PSU
FSP132-KHAM1
DE SC RIP TIO N
This series of AC /DC switching power supplies are for 132-
150 watts of continuous output power. They are enclosed
in a 94 V-1 rated polyphenylene-oxide case with an
IEC 320/C 14 inlet to mate with interchangeable cord for
world-wide use. All models meet EN55011, EN55022 and
FC C class B emission limits, and are designed for medical
applications, not for life-supporting equipment.
FEATURES
Low safety ground leakage current
Both C lass I and C lass II models are certified to medical
safety standards.
Wide input range 90 to 264 VAC
Optional output connectors
100% burn-in
Over voltage protection
Over current protection
C ompliant with C EC and Energy Star Efficiency level V
requirements (except PMP150-12 and PMP150-13 to
level I V )
No load power consumption less than 0.5 W
Average active efficiency ≧ 87%
C ompliant with RoHS requirements
W ATTAGE
Wa tta g e :
132W
DIMENSION
Dimension:
207.6mm(L) x 82.0mm(W) x
49.7mm(H)
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
Leakage Current:
90-264 Vdc
47-63 Hz
2.0A(rms) for115VAC ,
1.0A(rms) for230VAC
220 µA max. @ 264 VAC ,63
Hz
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Ripple & Noise:
Maximum excursion of 4% or
better on all models,
recovering to 1% of final
value within 500 us after a
25% step load change
Over Current
Protected to short circuit
Protection:
conditions
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:0°C to
+60°C
Storage Temperature: -20°C to +
85℃
OUTPUT ELECTRICAL
Single Output:
12 V/ 11 A
NO TE S
1. C lass I models are equipped with IEC 320/C 14 inlet.
2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line
voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the
output.
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice