FSP085-DACM1 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – Low safety ground leakage current

Medical PSU
FSP085-DACM1
DE SC RIP TIO N
This series of AC /DC switching power supplies are for 85
watts of continuous output power. They are enclosed in a
94V-0 rated polyphenylene-oxide case with an IEC 320/C 8
inlet to mate with interchangeable cord for world-wide use.
All models meet EN55011 and FC C class B emission limits,
and are designed for medical applications, not for life-
supporting equipment.
FEATURES
High efficiency
Low safety ground leakage current
Wide input range 90-264 VAC
100% burn-in
Overvoltage protection
Short-circuit protection
Overpower protection
C ompliant with C EC and Energy Star Efficiency level V
requirements
*No load power consumption less than 0.5 W
*Average active efficiency ≧87%
C ompliant with RoHS requirements
C ompliant with IPX1
W ATTAGE
Wa tta g e :
85W
DIMENSION
Dimension:
134.0mm(L) x 58.0mm(W) x
32.0mm(H)
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
Leakage Current:
90-264 Vdc
47-63 Hz
1.70A(rms) for 115VAC ,
0.90A(rms) for 230VAC
100 µA max. @ 264 VAC ,63
Hz
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Ripple & Noise:
Maximum excursion of 4% or
better on all models,
recovering to 1% of final
value within 500 us after a
25% step load change
Over Current
Protected to short circuit
Protection:
conditions
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:0°C to
+60°C
Storage Temperature: -40°C to +
85℃
Hum idity :
Operating : 5% to 95% RH, Non-
condensing
OUTPUT ELECTRICAL
Single Output:
24 V/ 3.54 A
NO TE S
1. Ripple and noise is maximum peak to peak voltage value measured at output within 20MHz bandwidth, at rated line
voltage and output load ranges, and with a 10 uF tantalum capacitor in parallel with a 0.1uF ceramic capacitor across the
output.
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice