FSP060-3K90M1 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – Medical and ITE approvals

Medical PSU
FSP060-3K90M1
DE SC RIP TIO N
This series of compact, open PC B constructed, AC -DC
switching power supplies are capable of delivering 37.5-64
watts of continuous output power at convection
cooling.They operate at 90-264 VAC input voltage without
the need of voltage ion, and are suited for medical,
information technology and industrial applications.
Approval to both EN60601-1 and EN60950-1 safety
standards improves design-in time and reduces end
equipment compliance costs.
FEATURES
Medical and ITE approvals
C ompact size 2” x 4” x 1.18”
Single, dua l and triple outputs
Wide-range input 90-264 VAC
Low earth leakage current
Level B emissions
RoHS compliant
W ATTAGE
Wa tta g e :
55W
DIMENSION
Dimension:
101.6mm(L) x 50.8mm(W) x
30.0mm(H)
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
Leakage Current:
90-264 Vdc
47-63 Hz
1.3A(rms) for100VAC ,
0.7A(rms) for240VAC
150 µA max. @ 264 VAC ,63
Hz
SAFETY STANDARD APPAOVAL
OUTPUT SPECIFICATION
Ripple & Noise:
Maximum excursion of 4% or
better on all models,
recovering to 1% of final
value within 500 us after a
25% step load change
Over Current
All outputs protected to short
Protection:
circuit conditions.
GENERAL SPECIFICATION
Efficiency:
80~88% typical except PM42-31-3A
and PM42-31-5A at 75% typical
Inrush Current: 30A @115VAC , or 60A @ 230VAC ,
at 25"C cold start
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Operating Temperature:-10°C to
+70°C
Storage Temperature: -40°C to +
85℃
MT BF :
400,000 hours at full load at 25"C
ambient, calculated per MIL-HDBK-
217F
*Output Voltage and C urrent Rating
Ripple-Noise(R-P) mV
Regulation Load %
Output Max.(A)
Output Min.(A)
+5V
100mV
±3%
8A
0.5A
+24V
240mV
±5%
1.5A
0.1A
-12V
120mV
±4%
0.5A
0A
NO TE S
1. Safety approvals are for PC B form only. To order models with metallic L-bracket or box, change suffix “A” to “B” for L-
bracket form, to “C ” for enclosed form (see Outline Drawing of C ased Internal Switchers), e.g. PM100-14C .
2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line
voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the
output.
MECHANICAL SPECIFICATION
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice