500-60APN85_15 Datasheet, PDF (1/1 Pages) FSP TECHNOLOGY INC. – specification describes a 500 watts power supply.

PC PSU
FSP500-60APN(85)
DE SC RIP TIO N
This specification describes a 500 watts power supply. With
+5V stand-by, second 12V rail and remote ON/OFF control
for ATX-12V system and a “Power factor collector (PFC )”
circuit to meet EPA requirement of input range with in
230V/50Hz.
AP P L IC ATIO N
Desktop
W ATTAGE
Wa tta g e :
500W
SAFETY STANDARD APPAOVAL
DIMENSION
Dimension:
140mm(L) x 150mm(W) x
86mm(H)
PRODUCT HIGHLIGHT
Efficiency Level:
Bronze
Erp Lot:
<0.5W
Input Voltage:
230V
INPUT SPECIFICATION
Input Range:
Input Frequency:
Input Current:
200-240 Vac
47-63 Hz
4Amp (maximum) at 230
Vrms/ 50 Hz. .
OUTPUT SPECIFICATION
Output Rise Time:
+3.3V 20mS (maximum)
+5V 20mS (maximum)
+12 V1 20mS (maximum)
+12 V2 20mS (maximum)
-12 V 20mS (maximum)
GENERAL SPECIFICATION
Efficiency:
Bronze
PWOK Delay Time: 500ms > PWOK > 100ms
EMC Performance: EN55022 class B
EN55024
EN 61000-3-2
EN 61000-3-3
ENVIRONMENTAL SPECIFICATION
T E MP.Ra ng e :
Storage Temperature: -40°C to +
70℃
MT BF :
The power supply reliability, when
calculated by “Bellcore” latest
revision are exceed 100,000 hours
with all output at maximum load and
an ambient temperature of 25℃.
The special requirement is for
cooling fan that MTTF be guarantee
over 30,000 hours at 25℃ ambient
temperature.
*Output Voltage and C urrent Rating
+3.3V
Ripple-Noise(R-P) mV 50mV
Regulation Load %
±5%
Output Max.(A)
24A
Output Min.(A)
0.5A
+5V
50mV
±5%
20A
0.3A
+12V1
5mV
±5%
18A
0.5A
+12V2
120mV
±5%
18A
0.5A
-12V
200mV
±10%
0.3A
0A
+5Vsb
50mV
±5%
2.5A
0A
NO TE S
3.3V & +5V total output not exceed 120W.
When +5V is load to 20A, the +3.3V maximum load is 6A.
When +3.3V is load to 24A, the +5V maximum load is 8A.
+12V1 & +12V2 total output not exceed 408W
This content is subject to change, please refer to specification for m ore detail.
FSP reserve the right to change the content without prior notice