V23838-S5-N1 Datasheet, PDF (3/9 Pages) Infineon Technologies AG – Press-fit Cage for Small Form-factor Pluggable (SFP) Transceiver

V23838-S5-N1, V23838-S5-N1-BB Product Specification – August 2003
SFP Cage Host Board Mechanical Layout
1) _Y
CROSS-HATCHED AREA DENOTES
COMPONENT AND TRACE KEEP-OUT
(EXCEPT CHASSIS GROUND)
1) Datum and basic dimensions
established by customer
34.5
2) Pads and vias are chassis ground, 11 places
3) Thru holes, plating optional
10
3 PLACES
7.2
7.1
2.5 2.5
∅0.85±0.05
⊕ ∅0.1 S X Y
A 2)
PIN 1
∅1.05±0.1
⊕ ∅0.1 L X A S
10 HOLES ₂₎
Dimensions in mm
THIS AREA DENOTES
COMPONENT KEEP-OUT
(TRACES ALLOWED)
26.8
41.3
42.3
Figure 1 Single-sided Host Board Layout
5
10
3 PLACES
2 ²⁾
11 PLACES
∅0.95±0.05
⊕ ∅0.1 L X A S
9 HOLES ₃₎
File: 1519
16.25±0.1
[.640] 1)
Y
1.7±0.9
3.5±0.3
15.25±0.1
Y
[.600]
SECTION Y-Y
0.4±0.1
BEZEL OPENING
BELOW PC BOARD
1) MINIMUM PITCH ILLUSTRATED, ENGLISH DIMENSIONS ARE FOR REFERENCE ONLY
NOT RECOMMENDED FOR PCI EXPANSION CARD APPLICATIONS
Dimensions in mm [inches]
Figure 2 Recommended Bezel Design
© Finisar Corporation August 07, 2003 Rev. D
File: 1520
Page 3