TI322513 Datasheet, PDF (2/2 Pages) Frontier Electronics. – SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)

TI322513 (1206) Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)
Rev. A
E. Impedance Characteristics of Materials:
a. Z Material is for applications whose blocking regions are near 100 MHz.
b. L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
c. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low
insertion loss at high frequency.
d. Different materials are available for different application range.
e. With one material, higher impedance has sharper characteristics.
f. Please confirm the signal wave form to choose suitable products.
F. General Information:
1. TI322513-yxxx, “TI” = Type, “32” = Length, “25” = Width, “13” = Thickness, “y” = Material, “xxx” =
Impedance.
2. Tolerance: ±25%
3. Small and lightweight surface mounting type
4. High-density packaging with a pitch of 2.54 mm (0.1 inch) max.is possible. This series requires less space and
have greater EMI suppression effects.
5. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
6. Applicable to both flow and IR reflow soldering.
7. High impedance covers wide frequency ranges.
8. TI series can be used in high current circuits due to its low DC resistance.
9. Operating temperature: -40°C to +125ºC
10. Impedance and Current range: From 30 Ω (3000 mA) to 150 Ω (5000 mA)
11. Unspecified values available on request.
12. MSL: Level 1.
G. Applications:
1. Game Consoles
2. Set Top Boxes
3. Cables Modems
4. Computers
5. Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.^®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: [phone], Fax: [phone]