GP20-005G Datasheet, PDF (1/2 Pages) Frontier Electronics. – 2A GENERAL PURPOSE GLASS PASSIVATED RECTIFIER

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: [phone] FAX: [phone]
E-mail: [e-mail]
Web: http://www.frontierusa.com
2A GENERAL PURPOSE GLASS PASSIVATED RECTIFIER
GP20-005G THRU GP20-10G
FEATURES
z LOW FORWARD VOLTAGE
z HIGH CURRENT CAPABILITY
z LOW LEAKAGE CURRENT
z HIGH SURGE CAPABILITY
z GLASS PASSIVATED CHIP JUNCTION
MECHANICAL DATA
z CASE: DO15, MOLDED PLASTIC USE UL 94V-0 RECOGNIZED
FLAME RETARDANT EPOXY, DIMENSIONS IN INCHES
AND (MILLIMETERS)
z TERMINAL: AXIAL LEADS, SOLDERABLE PER MIL-STD-202
METHOD 208
z POLARITY: COLOR BAND DENOTES CATHODE
z MOUNTING POSITION : ANY
z WEIGHT: 0.4 GRAMS
1.0(25.4)
MIN
.300(7.6)
.230(5.8)
1.0(25.4)
MIN
.034(0.9)
.028(0.7)
.140(3.6)
.104(2.6)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
SYMBOL
GP20
-005G
GP20
-01G
GP20
-02G
GP20
-04G
GP20
-06G
GP20
-08G
GP20
-10G
UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
V_RRM
50
100
200
400
600
800 1000
V
MAXIMUM RMS VOLTAGE
V_RMS
35
70
140
280
420
560
700
V
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375”(9.5mm) LEAD LENGTH AT TA=55°C
V_DC
50
100
200
400
600
800 1000
V
I_O
2.0
A
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
I_FSM
70
A
TYPICAL JUNCTION CAPACITANCE (NOTE1)
C_J
25
PF
TYPICAL THERMAL RESISTANCE (NOTE 2)
R_θja
40
℃/W
STORAGE TEMPERATURE RANGE
T_STG
-55 TO + 175
℃
OPERATING TEMPERATURE RANGE
T_OP
-55 TO + 175
℃
ELECTRICAL CHARACTERISTICS (A_T T_A =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL
GP20
-005G
MAXIMUM FORWARD VOLTAGE AT I_O DC
V_F
MAXIMUM REVERSE CURRENT AT 25℃
I_R
GP20
-01G
GP20
-02G
GP20
-04G
1.1
5
MAXIMUM REVERSE CURRENT AT 100℃
I_R
50
NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20×20×1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
GP20
-06G
GP20
-08G
GP20
-10G
UNITS
V
μA
μA
GP20-005G THRU GP20-10G
Page: 1