AT1575A1306AT Datasheet, PDF (1/3 Pages) Frontier Electronics. – Minimum no-GND area requirement.

AT1575A1306AT ANTENNA SPECIFICATION
Rev. A
PRODUCT FEATURES
1. Surface mount ceramic antenna with a small size of 3.2 X 1.6 X 0.6 mm.
2. Minimum no-GND area requirement.
3. Highly stable under temperature and humidity changes.
4. Superior performance in a compact size, RoHS compliant.
RF CHARACTERISTICS
Working Frequency Range
Gain
VSWR
Polarization
Radiation Pattern
Impedance
Specification
1.575GHz
3.0 dBi(Typical)
2 max.
Linear
Omni-directional
50Ω
PHYSICAL DIMENSIONS
Figure
TERMINAL CONFIGURATION
Pin
2
1
2
1
Connection
Feed point
NC (Soldering terminal)
PCB DESIGN/LAYOUT CONSIDERATION
Symbol
Dimension
(mm)
L
3.10 ± 0.20
W
1.60 ± 0.20
T
0.60 ± 0.10
A
0.25 ± 0.20
Caution: Test board is designed with L=90mm and D=40mm. Smaller “L”
and “D” dimensions can cause degradation in antenna performance.
Frontier Electronics Corp.^®
http://www.frontierusa.com
Page: 1 of 3
667 E. Cochran St., Simi Valley, CA 93065
Phone: [phone], Fax: [phone]