1N4001S Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: [phone] FAX: [phone]
E-mail: [e-mail]
Web: http://www.frontierusa.com
1A GENERAL PURPOSE PLASTIC RECTIFIER
1N4001S THRU 1N4007S
FEATURES
z 0.6 mm LEAD DIAMETER SUITABLE FOR AUTO INSERTION
z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND
z DIFFUSED JUNCTION
z HIGH SURGE CURRENT CAPABILITY
MECHANICAL DATA
z CASE: TRANSFER MOLDED, A-405, DIMENSIONS IN
INCHES AND (MILLIMETERS)
z LEAD: SOLDERABLE PER MIL-STD-202, METHOD 208
z POLARITY: CATHODE INDICATED BY COLOR BAND
z WEIGHT: 0.20 GRAMS
1.0(25.4)
MIN
.025(0.6)
.021(0.5)
.205(5.2)
.166(4.2)
1.0(25.4)
MIN
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS
OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD,
DERATE CURRENT BY 20%
RATINGS
SYMBOL 1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
MAXIMUM RMS VOLTAGE
MAXIMUM DC BLOCKING VOLTAGE
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375” (9.5mm) LEAD LENGTH AT TA=55 ºC
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
TYPICAL THERMAL RESISTANCE (NOTE 2)
STORAGE TEMPERATURE RANGE
OPERATING TEMPERATURE RANGE
V_RRM
50
V_RMS
35
V_DC
50
I_O
I_FSM
C_J
R_θja
T_STG
T_OP
100
200
400
600
800 1000
V
70
140
280
420
560
700
V
100
200
400
600
800 1000
V
1.0
A
30
15
50
-55 TO + 175
-55 TO + 175
A
PF
ºC /W
ºC
ºC
ELECTRICAL CHARACTERISTICS (A_T T_A =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL 1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S UNITS
MAXIMUM FORWARD VOLTAGE AT I_O DC
V_F
MAXIMUM REVERSE CURRENT AT 25 ºC
I_R
MAXIMUM REVERSE CURRENT AT 100 ºC
I_R
1.1
V
5
μA
50
μA
NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t (mm) COPPER PLATE AT LEAD LENGTH 5mm
1N4001S THRU 1N4007S
Page:1