1N4001G Datasheet, PDF (1/2 Pages) NXP Semiconductors – Rectifiers(Rugged glass package, using a high temperature alloyed construction)

Frontier Electronics Corp.
667 E. COCHRAN STREET, SIMI VALLEY, CA 93065
TEL: [phone] FAX: [phone]
E-mail: [e-mail]
Web: http://www.frontierusa.com
A GENERAL PURPOSE GLASS PASSIVATED RECTIFIER
1N4001G THRU 1N4007G
FEATURES
z UL 94V0 FLAME RETARDANT EPOXY MOLDING COMPOUND
z GLASS PASSIVATED CHIP JUNCTION
z LOW COST
z HIGH SURGE CURRENT CAPABILITY
MECHANICAL DATA
z CASE: TRANSFER MOLDED, DO41, DIMENSIONS IN INCHES AND (MILLIMETERS)
z LEADS: SOLDERABLE PER MIL-STD-202, METHOD 208
z POLARITY: CATHODE INDICATED BY COLOR BAND
z WEIGHT: 0.34 GRAMS
1.0(25.4)
MIN
.205(5.2)
.166(4.2)
1.0(25.4)
MIN
.034(0.9)
.028(0.7)
.107(2.7)
.080(2.0)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED
SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20%
RATINGS
SYMBOL 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS
MAXIMUM RECURRENT PEAK REVERSE VOLTAGE
V_RRM
50
100
200
400
600
800
1000
V
MAXIMUM RMS VOLTAGE
V_RMS
35
70
140
280
420
560
700
V
MAXIMUM DC BLOCKING VOLTAGE
V_DC
50
100
200
400
600
800
1000
V
MAXIMUM AVERAGE FORWARD RECTIFIED CURRENT
0.375” (9.5mm) LEAD LENGTH AT TA=55°C
I_O
1.0
A
PEAK FORWARD SURGE CURRENT, 8.3ms SINGLE HALF
SINE-WAVE SUPERIMPOSED ON RATED LOAD
I_FSM
30
A
TYPICAL JUNCTION CAPACITANCE (NOTE 1)
C_J
15
PF
TYPICAL THERMAL RESISTANCE (NOTE 2)
R_θja
50
ºC /W
STORAGE TEMPERATURE RANGE
T_STG
-55 TO + 175
ºC
OPERATING TEMPERATURE RANGE
T_OP
-55 TO + 175
ºC
ELECTRICAL CHARACTERISTICS (AT T_A =25°C UNLESS OTHERWISE NOTED)
CHARACTERISTICS
SYMBOL 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G UNITS
MAXIMUM FORWARD VOLTAGE AT I_O DC
V_F
MAXIMUM REVERSE CURRENT AT 25 ºC
I_R
MAXIMUM REVERSE CURRENT AT 100 ºC
I_R
1.1
V
5
μA
50
μA
NOTE: 1. MEASURED AT 1MHZ AND APPLIED REVERSE VOLTAGE OF 4.0 VOLTS
2. BOTH LEADS ATTACHED TO HEAT SINK 20x20x1t(mm) COPPER PLATE AT LEAD LENGTH 5mm
1N4001G THRU 1N4007G
Page: 1