960 Datasheet, PDF (3/5 Pages) Frequency Devices, Inc. – Wideband High-Gain Amplifier Instrument

Models 960 & 960B
Single Channel – Certified
Model 960 Series
Rear Panel Description
Location of Rear Panel Terminals, Controls and Labels
Model
960
K
Model
960B
L
M
N
K. IDENTIFICATION LABEL: This label
N. VOLTAGE Selector Module:
identifies the Model number, filter type,
For 230 Vac operation, use a screwdriver
serial number, date of manufacture,
blade to pry open the module door (entry
operating power limits and fuse
point next to window), remove the red
requirements of the instrument.
fuse cartridge, replace the 0.2 Amp, 250 V
fuse with a 0.1 Amp, 250 Volt fuse,
L. AC POWER CONNECTION: Denotes
remove the shorting clip in the other leg
plug and fuse location.
and replace it with a second 0.1 Amp
fuse. Turn the module 180 degrees, re-
M. POWER ON/OFF Switch: Is a two-
insert and close the module door. The
position toggle switch on the back panel
numerals 230V will now show in the
that interrupts/completes the power
module window. Reverse procedure to
circuit.
change back to 115V.
3
1784 Chessie Lane, Ottawa, Illinois 61350 • Tel: [phone] • FAX: [phone]
e-mail: [e-mail] • Web Address: http://www.freqdev.com