D51 Datasheet, PDF (2/2 Pages) Frequency Devices, Inc. – Telephone Message & Circuit Noise Measurement

Specifications
(25°C and Vs ± 15 Vdc)
Analog Input Characteristics
Impedance
Source Impedance¹
Bias Current²
10 kW min.
600 W max.
0
Voltage Range
± 10 V peak
Maximum Safe Voltage ± Vs
Analog Output Characteristics
Impedance (Closed Loop) < 1 W typ.
10 W max.
Linear Operating Range
Maximum Current³
± 10 V
± 2 mA
Offset Voltage
± 5 mV
Offset Temp. Coeff.
Noise⁴
50 mV / °C
50 mVRMS
Gain (non-inverting)
0 ± 0.1 dB @ 1 kHz
Power Supply (±Vs)
Rated Voltage
Operating Range
Maximum Safe Voltage
Quiescent Current
Temperature
Operating
Storage
± 15 Vdc
± 5 to ± 18 Vdc
± 18 Vdc
± 1.5 mA typ.
± 2.0 mA max.
0 to + 70 °C
- 25 to + 85 °C
Notes:
1. Maximum allowable series input resistance if gain
accuracy's are to be maintained.
2. Capacitor coupled.
3. Output is short circuit protected to common.
DO NOT CONNECT TO ±Vs.
4. DC to 50 kHz excluding DC offset with input grounded.
D51 Series
Pin-Out and Package Data
Ordering Information
0.80
Side View
0.025 dia.
All dimensions are in inches
All case dimensions ± 0.01"
1.80
Front View
0.30
0.15 (min)
0.80
0.70
OUT
+VS
Bottom View
0.10
0.00
GND
-VS
IN
We hope the information given here will be helpful. The information is based on data and our best knowledge, and we consider the information to be true and accurate. Please read all statements,
recommendations or suggestions herein in conjunction with our conditions of sale which apply to all goods supplied by us. We assume no responsibility for the use of these statements,
recommendations or suggestions, nor do we intend them as a recommendation for any use which would infringe any patent or copyright.
PR-00D51-02
2
1784 Chessie Lane, Ottawa, IL 61350 • Tel: [phone] • FAX: [phone]
e-mail: [e-mail] • Web Address: http://www.freqdev.com