English
Language : 

90IP Datasheet, PDF (1/2 Pages) Frequency Devices, Inc. – smartSLOT Technology
LabWindows/CVITM Driver with
RS-232/GPIB Interface
90IP Description
The 90IP (AC Powered) and 90IPB (External
Battery Operated, 12V DC) Instrumentation
Platforms are four slot chassis with controller that
may be used as a bench-top instrument or in rack-
mount systems. Each 90IP and 90IPB chassis
has its own controller card and display providing
both hard and soft front panel addressability along
with space for up to 4 slot cards. The soft front
panel allows GPIB or RS-232 communication to
load pre-stored setup configurations. Each slot
card has its own micro-controller to automatically
configure the controller display when installing a
slot card (smartSLOT Technology). Up to 32 of
these multiple-channel instruments may be daisy
chained and addressed from a PC interface to
meet the needs of high channel count
applications.
All 90IP’s provide a carrier for a full range of
products that will include:
• Programmable Filters from 0.1 Hz to 300 kHz
• Programmable Instrumentation Amplifiers
• Bridge Conditioning
• Arbitrary Waveform Generators
90IP and 90IPB Features
• AC or External Battery (12V DC) powered
models available for a broad range of
applications.
• The half-rack chassis allows for use in bench
top or rack-mount applications utilizing the
90RM rack-mount shelf.
• Complete computer control through the GBIB
or RS-232 interface.
• Soft LabWindows/CVITM front panel for ease of
use.
• FDI’s smartSLOT Technology to maximize
system flexibility
90RM – 19” Rack-Mount Shelf
90IP and 90IPB
Instrumentation Platform
smartSLOT Technology
90PF Features
• Large number of filter options
• Adjustable frequencies from 0.10 Hz to 256 kHz
• 60 dB pre & 20 dB post gain
• <-100 dB Noise & Distortion
• Input noise < 12 nV/ Hz
• DC offset, factory set with fine adjustment on
board.
• BNC I/O provides differential input and single
ended output per channel.
90PGA Features
• Selectable single-ended or differential
input, AC or DC coupled.
• Gain/phase matched channels
• LED clipping indicators
• Memory storage for up to 9 set-
ups/channel
• Input noise 12 nV/ Hz typ.
• Programmable gain, to 64.5 dB in 0.5 dB
steps.
• Input protection to 150 Volts P-P
• Outputs able to drive full range into 50 Ω.
1
1784 Chessie Lane, Ottawa, IL 61350 • Tel: 800/252-7074, 815/434-7800 • FAX: 815/434-8176
e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com