33897 Datasheet, PDF (8/21 Pages) Freescale Semiconductor, Inc – Single Wire CAN Transceiver

ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 4. Static Electrical Characteristics (continued)
Characteristics noted under conditions of -40°C ≤ T_A ≤ 125°C, unless otherwise stated. Voltages are relative to GND unless
otherwise noted. All positive currents are into the terminal. All negative currents are out of the terminal.
Characteristic
Symbol
Min
Typ
Max
Unit
LOAD
LOAD Voltage Rise ⁽⁸⁾
Normal Speed and Voltage Mode, Transmit High-
Voltage Mode, Transmit High-Speed Mode
V_LDRISE
I_IN = 1.0 mA, 5.0 V ≤ V_BATT ≤ 26.5 V
–
Sleep Mode
I_IN = 7.0 mA
33897/T
–
I_IN = 7.0 mA ⁽⁹⁾
33897A/B/C/D
–
Loss of Battery
–
I_IN = 7.0 mA
LOAD Leakage During Loss of Module Ground ⁽¹⁰⁾
I_LDLEAK
0.0 V ≤ V_BATT ≤ 18 V
33897/A/B/T
0.0
0.0 V ≤ V_BATT ≤ 18 V
33897C/D
-10
V
–
0.1
–
1.0
–
0.1
–
1.0
µA
–
- 90
–
10
BUS
Passive Out BUS Leakage
Passive In
0.0 V ≤ V_BATT ≤ 26.5 V, -1.5 V ≤ V_BUS < 0 V
Active In
0.0 V ≤ V_BATT ≤ 26.5 V, 0 V < V_BUS ≤ 12.5 V
I_LEAK
I_LKAI
-5.0
–
-5.0
–
BUS Leakage During Loss of Module Ground ⁽¹¹⁾
0.0 V ≤ V_BATT ≤ 18 V
33897/A/B/T
I_BLKLOG
-10
–
0.0 V ≤ V_BATT ≤ 18 V
33897C/D
0.0
–
High-Voltage Wake-up Mode Output High Voltage
12 V ≤ V_BATT ≤ 26.5 V, 200 Ω ≤ R_L ≤ 3332 Ω
33897/T V_HVWUOHF
9.7
–
33897A/B/C/D _VHVWUOHO
9.9
–
5.0 V ≤ V_BATT < 12 V, 200 Ω ≤ R_L ≤ 3332 Ω
Lesser of V_BAT - 1.5 or 9.7
High-Speed Mode Output High Voltage
8.0 V ≤ V_BATT ≤ 16 V, 75 Ω ≤ R_L ≤ 135 Ω
V_OHHS
4.2
–
Normal Mode Output High Voltage
6.0 V ≤ V_BATT ≤ 26.5 V, 200 Ω ≤ R_L ≤ 3332 Ω
5.0 V ≤ V_BATT < 6.0 V, 200 Ω ≤ R_L ≤ 3332 Ω
V_NOHF
4.4
–
V_NOHO
Lesser of V_BATT - 1.6 or
–
4.4
BUS Low Voltage
V_OL
5.0 V ≤ V_BATT ≤ 26.5 V, 200 Ω ≤ R_L ≤ 3332 Ω
- 0.2
–
Short Circuit BUS Output Current
Dominant State, 5.0 V ≤ V_BATT ≤ 26.5 V
I_BSC
-350
–
µA
5.0
5.0
10
-90
V
12.5
12.5
V_BATT
V
5.1
V
5.1
Lesser of V_BATT
or 5.1
V
0.2
mA
- 150
Notes
8. GMW3089V2.4 specifies the maximum load voltage rise to be 0.1 V whenever module battery is intact, including when in Sleep mode.
The maximum load voltage rise of 1.0 V in Sleep mode is a GM-approved exception to GMW3089V2.4.
9. 33897A/B/C/D remove diode drop during Sleep mode.
10. LOAD terminal is at system ground voltage.
11. BUS terminal is at system ground voltage
33897/A/B/C/D/T
8
Analog Integrated Circuit Device Data
Freescale Semiconductor