56F8013_08 Datasheet, PDF (78/126 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers

“Hard Coded” Address Portion ^{Instruction Portion}
6 Bits from I/O Short Address Mode Instruction
16 Bits from SIM_IOSALO Register
2 bits from SIM_IOSAHI Register
Full 24-Bit for Short I/O Address
Figure 6-12 I/O Short Address Determination
With this register set, an interrupt driver can set the SIM_IOSALO register pair to point to its peripheral
registers and then use the I/O Short addressing mode to reference them. The ISR should restore this register
to its previous contents prior to returning from interrupt.
Note: The default value of this register set points to the EOnCE registers.
Note:
The pipeline delay between setting this register set and using short I/O addressing with the new value
is five instruction cycles.
Base + $D 15 14 13 12 11 10 9
8
7
6
5
4
3
Read
0
0
0
0
0
0
0
0
0
0
0
0
0
Write
RESET
0
0
0
0
0
0
0
0
0
0
0
0
0
2
10
0
ISAL[23:22]
0
1
1
Figure 6-13 I/O Short Address Location High Register (SIM_IOSAHI)
6.3.10.1 Reserved—Bits 15—2
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.3.10.2 Input/Output Short Address Location (ISAL[23:22])—Bits 1–0
This field represents the upper two address bits of the “hard coded” I/O short address.
56F8013/56F8011 Data Sheet, Rev. 12
78
Freescale Semiconductor