MC33199 Datasheet, PDF (4/18 Pages) Freescale Semiconductor, Inc – Automotive ISO 9141 Serial Link Driver

ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
MAXIMUM RATINGS
Table 2. Maximum Ratings
All voltages are with respect to ground unless otherwise noted. Exceeding these ratings may cause a malfunction or
permanent damage to the device.
Ratings
Symbol
Value
Unit
ELECTRICAL RATINGS ⁽¹⁾
VS Supply Pin
DC Voltage Range
Transient Pulse ⁽²⁾
V
V_S
0.5 to + 40
V_PULSE
2 to + 40
VCC Supply DC Voltage Range
DIA and L Pins ⁽²⁾
DC Voltage Range
Transient Pulse (clamped by internal diode)
DC Source Current
DIA Low Level Sink Current
TXD DC Voltage Range
REF-IN DC Voltage Range
VS < VCC
VS > VCC
ESD Voltage Capability
THERMAL RATINGS
V_CC
0.3 to + 6.0
V
- 0.5 TO + 38
V
-2
V
- 50
mA
INT. LIMIT
mA
-0.3 TO V_CC +0.3
V
V
-0.3 TO V_CC
-0.3 TO V_S
V_ESD
+/-2000
V
Storage Temperature
T_STG
55 to + 150
°C
Operating Junction Temperature
T_J
40 to + 150
°C
Thermal Resistance, Junction to air
R_TJA
180
C/W
Max Power Dissipation (@ T_A=105 °C)
Peak Package Reflow Temperature During Reflow ⁽³⁾, ⁽⁴⁾
P_D
250
mW
T_PPRT
Note 4.
°C
Notes
1. The device is compatible with Specification: “Diagnosis System ISO9141”
2. See the test Circuit (Figure 26). Transient test pulse according to ISO76371 and DIN 40839, highest test levels
3. Pin soldering temperature limit is for 10 seconds maximum duration. Not designed for immersion soldering. Exceeding these limits may
cause malfunction or permanent damage to the device.
4. Freescale’s Package Reflow capability meets Pb-free requirements for JEDEC standard J-STD-020C. For Peak Package Reflow
Temperature and Moisture Sensitivity Levels (MSL),
Go to www.freescale.com, search by part number [e.g. remove prefixes/suffixes and enter the core ID to view all orderable parts. (i.e.
MC33xxxD enter 33xxx), and review parametrics.
33199
4
Analog Integrated Circuit Device Data
Freescale Semiconductor