MC13202_0812 Datasheet, PDF (3/30 Pages) Freescale Semiconductor, Inc – 2.4 GHz Low Power Transceiver for the IEEE® 802.15.4 Standard

• Integrated transmit/receive switch
• Dual PA output pairs which can be programmed for full differential single port or dual port
operation that supports an external LNA and/or PA
• Three power down modes for increased battery life
— < 1 µA Off current
— 1.0 µA Typical Hibernate current
— 35 µA Typical Doze current (no CLKO)
• Programmable frequency clock output (CLKO) for use by MCU
• Onboard trim capability for 16 MHz crystal reference oscillator eliminates need for external
variable capacitors and allows for automated production frequency calibration
• Four internal timer comparators available to supplement MCU timer resources
• Supports both Packet Mode and Streaming Mode data transfer
• Buffered transmit and receive data packets for simplified use with low cost MCUs
• Seven GPIO to supplement MCU GPIO
• Operating temperature range: -40 °C to 85 °C
• Small form factor QFN-32 Package
— Meets moisture sensitivity level (MSL) 3
— 260 °C peak reflow temperature
— Meets lead-free requirements
2.1 Software Features
Freescale provides a wide range of software functionality to complement the MC13202 hardware. There
are three levels of application solutions:
1. Simple proprietary wireless connectivity.
2. User networks built on the 802.15.4 MAC standard.
3. ZigBee-compliant network stack.
2.1.1 Simple MAC (SMAC)
• Small memory footprint (about 3 Kbytes typical)
• Supports point-to-point and star network configurations
• Proprietary networks
• Source code and application examples provided
MC13202 Technical Data, Rev. 1.5
Freescale Semiconductor
3