DRM101 Datasheet, PDF (29/56 Pages) Freescale Semiconductor, Inc – Blood Pressure Monitor Using the Flexis QE128 Family

Hardware Description
3.10.1.3 Placement
When components in the board were situated, the interfaces with the outer casing and the connections to
the outputs of the system were taken into consideration. The pressure sensor was placed near the entry
point coming from the cuff. Special care was taken to isolate the RF section of the board to avoid noise
coupling into the transmitter. The board has different mounting holes for assembly to the casing and the
OLED of the system.
Figure 3-3. Top Placement and Labeling
Blood Pressure Monitor Design Reference Manual, Rev. 0
Freescale Semiconductor
3-7