|
FRDM-BC3770-EVM Datasheet, PDF (14/44 Pages) Freescale Semiconductor, Inc – fully programmable switching charger with dual-path output for single-cell Li-Ion and Li-Polymer battery. | |||
|
◁ |
Getting to Know the Hardware
4.2 Accessory Interface Board
The FRDM-BC3770-EVB kit is typically used with the FRDM-25KLZ shown in Figure 10. The FRDM-KL25Z is an ultra-low-cost
development platform for Kinetis L Series KL1x (KL14/15) and KL2x (KL24/25) MCUs built on ARM® Cortexâ¢-M0+ processor. Features
include easy access to MCU I/O, battery-ready, low-power operation, a standard-based form factor with expansion board options and a
built-in debug interface for flash programming and run-control. The FRDM-KL25Z is supported by a range of Freescale and third-party
development software.
KL25Z 80 LQFP
:Ï /ͬK ,ÄÄÄÄÆ
:Ï® /ͬK ,ÄÄÄÄÆ
ZÄÆÄt
<>Ϯϱ h^B
CapÄÄÅÆÇÄ dŽƵÄÅ ^ůÅÄÄÆ
:ÏϬ /ͬK ,ÄÄÄÄÆ
RGB LED
:ϵ /ͬK ,ÄÄÄÄÆ
MMA8451Q
KÆÄŶ^
Figure 10. FRDM-KL25Z Freedom Development Platform
For more information on the FRDM-KL25Z board, go to the Freescale product summary page at
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=FRDM-KL25Z
KTFRDMBC3770UG Rev. 1.0
14
Freescale Semiconductor, Inc.
|
▷ |