|
K10P144M100SF2_11 Datasheet, PDF (13/71 Pages) Freescale Semiconductor, Inc – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz | |||
|
◁ |
5.1.3 Voltage and current operating behaviors
Table 4. Voltage and current operating behaviors
Symbol
VOH
Description
Output high voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = -10mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -3mA
Min.
VDD â 0.5
VDD â 0.5
Max.
â
â
Unit
V
V
Output high voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOH = -2mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOH = -0.6mA
VDD â 0.5
â
V
VDD â 0.5
â
V
IOHT
Output high current total for all ports
VOL
Output low voltage â high drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 10mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 3mA
â
100
mA
â
0.5
V
â
0.5
V
Output low voltage â low drive strength
⢠2.7 V ⤠VDD ⤠3.6 V, IOL = 2mA
⢠1.71 V ⤠VDD ⤠2.7 V, IOL = 0.6mA
â
0.5
V
â
0.5
V
IOLT
Output low current total for all ports
IIN
Input leakage current (per pin)
IOZ
Hi-Z (off-state) leakage current (per pin)
RPU
Internal pullup resistors
RPD
Internal pulldown resistors
â
100
mA
â
1
μA
â
1
μA
30
50
kΩ
30
50
kΩ
1. Measured at VDD=3.6V
2. Measured at VDD supply voltage = VDD min and Vinput = VSS
3. Measured at VDD supply voltage = VDD min and Vinput = VDD
General
Notes
1
2
3
5.1.4 Power mode transition operating behaviors
All specifications except tPOR, and VLLSxâRUN recovery times in the following table
assume this clock configuration:
⢠CPU and system clocks = 100 MHz
⢠Bus and FlexBus clocks = 50 MHz
⢠Flash clock = 25 MHz
K10 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011.
Freescale Semiconductor, Inc.
Preliminary
13
|
▷ |