56F800 Datasheet, PDF (11/56 Pages) Freescale Semiconductor, Inc – 16-bit Digital Signal Controllers

Definitions, Acronyms, and Abbreviations
Definitions, acronyms and abbreviations for terms used in this document are defined below for
reference.
Codec
EEPROM
EVM
GPIO
IC
JTAG
LQFP
MPIO
OnCE^TM
PCB
PLL
RAM
ROM
SCI
SPI
SRAM
SSI
WS
COder/DECoder; a part used to convert analog signals to digital (Coder)
and digital signals to analog (Decoder)
Electrically Erasable Programmable Read Only Memory
Evaluation Module; a hardware platform which allows a customer to
evaluate the silicon and develop their application
General Purpose Input and Output Port; does not share pin functionality
with any other peripheral on the chip and can only be set as an input,
output or level-sensitive interrupt input
Integrated Circuit
Joint Test Action Group; a bus protocol/interface used for test and debug
Low-profile Quad Flat Pack
Multi-Purpose Input/Output Port; shares package pins with other
peripherals on the chip and can function as a GPIO
On-Chip Emulation, a debug bus and port created by Freescale to enable
designers to create a low-cost hardware interface for a professional
quality debug environment
Printed Circuit Board
Phase Locked Loop
Random Access Memory
Read-Only Memory
Serial Communications Interface Port
Serial Peripheral Interface Port
Static Random Access Memory
Synchronous Serial Interface Port
Wait State
Preface, Rev. 2
Freescale Semiconductor
ix