P1022DS-PA Datasheet, PDF (1/2 Pages) Freescale Semiconductor, Inc – Integrated media and communications processor development system

QorIQ Multicore Processor Development
P1022DS
Integrated media and communications
processor development system
Overview
The P1022/P1013 development system
(P1022DS) is ideal for hardware and software
development for embedded applications. It
leverages the highly integrated QorIQ P1022
processor, a Freescale Energy-Efficient
product solution, and leading-edge external
components.
The high level of integration in the P1022
processor helps to lower system costs,
improve performance and simplify board
design. The P1022 processor supports:
Dual e500 Cores Built on Power
Architecture^® Technology
• 800–1067 MHz
• 256 KB frontside L2 cache with ECC,
hardware cache coherent
• 36-bit physical addressing, DP-FPU
System Unit
• 64-/32-bit DDR2/DDR3 with ECC
• Integrated SEC 3.3 security engine
• Open-PIC interrupt controller, performance
monitor, 2 x I²C, timers, 16 GPIOs, DUART
• 16-bit enhanced local bus supports booting
from NAND flash memory
• Up to two USB 2.0 host controller with
ULPI interface
• SPI controller supports booting from SPI
serial flash memory
• SD/MMC card controller supports booting
from flash cards
• Up to two 10/100/1000 Ethernet controllers
(eTSEC) with Jumbo Frame support, SGMII
interface
• Enhanced features: Parser/filer, QOS,
IP-checksum offload, lossless flow control
• IEEE^® 1588 v2 support
• Three PCI Express^® 1.0a controllers
• Two SATA controllers
• I²S/TDM interface
• LCD interface
• Packet lossless deep sleep
The P1013 is a single-core version
of the P1022. The P1022 processor
also integrates an optional hardware
encryption block that supports different
algorithms for high-performance data
that is critical for supporting secure
communications. Devices marked
with an E include a security engine.
The P1022 also includes integrated
dual SATA controllers, LCD interface
and I²S/TDM audio interface, as well
as advanced power management
capabilities for Energy Star guidelines
with less than 300 mW deep sleep
power dissipation.
A board support package (BSP) is pre-
installed on the P1022DS. This BSP
consists of a boot loader (u-boot) and a
generic Power Architecture technology system
based on the Linux^® kernel. The u-boot binary
and the Linux kernel reside in the on-board
flash memory with a file system pre-installed
on the hard disk shipped in the P1022DS
development system.
The P1022DS BSP generation takes advantage
of the Linux Target Image Builder (LTIB), a
suite of tools that leverages existing open
source configuration scripts and source code
packages, combining them all into a single BSP
generation bundle. The source code packages
include boot loader and Linux kernel sources
as well as many user-space source code
packages to build a complete BSP. The LTIB
also provides compiler packages, required to
build the BSP. Freescale developers use the
LTIB to create BSPs for a multitude of Freescale
development markets. The LTIB leverages
as many BSP elements as possible for the
Freescale markets supported, while offering the
flexibility necessary to customize components
that require platform-specific modifications.
Many third-party applications are available
for the P1022DS. They are typically built
on top of the BSP delivered by Freescale
and can be installed on the hard disk. To
see demonstrations or to acquire details of
Freescale’s third-party applications for this
platform, please contact your local Freescale
sales office.