P1020RDB-PB Datasheet, PDF (1/2 Pages) Freescale Semiconductor, Inc – P1020/P1011 Reference Design Board

QorIQ Multicore Processor Development
P1020/P1011 Reference
Design Board
Overview
The QorIQ P1020 reference design board
(RDB) can help shorten your time to market
for networking, wired and wireless access,
industrial and medical applications. The cost-
effective, highly integrated board is based on
the QorIQ P1020 processor and leading-edge
external components to help you quickly design
and implement your target application.
The P1020RDB leverages the P1020 processor
and supports both the dual-core P1020 and
single-core P1011 configurations. The P1020
processor family is based on the e500 core,
built on Power Architecture^® technology, which
has a core frequency range of 533–800 MHz,
and supports a 32 KB instruction and L1 data
cache as well as a shared 256 KB frontside
cache. The P1020 also supports three Gigabit
Ethernet controllers with IEEE^® 1588 v2
support, USB 2.0, up to two PCI Express^® 1.0a
controllers, up to two SGMII SerDes interfaces,
32-bit DDR2/3 with ECC, SPI controller
supporting booting from SPI serial flash
memory, SD/MMC card controller supporting
booting from flash cards and an integrated
security engine. The P1020, built in 45 nm
process technology, provides high integration
that simplifies board design and offers a cost-
effective solution.
The P1020RDB platform features 1 GB
unbuffered DDR3 SDRAM, 16 MB NOR flash
and 32 MB NAND flash, where the platforms
can boot from either NOR or NAND flash
memory. It supports six Gigabit-capable
ports via an SGMII PHY, an RGMII PHY and
an on-board switch with four ports, as well
as two ports of USB On-the-Go (OTG), four
FXS ports and one FXO port via relay.